Home › Guides › Impression share
Google Ads impression share: what it means and what to fix
Google Ads impression share is the share of impressions your ads got out of those they were eligible for. The useful part is why you lost the rest: to budget or to Ad Rank. Only buy more share when the campaign already brings qualified leads at a cost you can afford.
Google Ads impression share is one of the few numbers that shows what you are missing, not just what you got. It is also easy to misread. A campaign at 40% can be in better shape than one at 90%, and pushing the number up can cost more than it brings back.
This guide explains each impression share column from Google's own help pages, then gives you a rule for when lost share is worth fixing. It is written for the accounts I run most: UAE businesses buying leads, where a click only matters if it turns into a booking or a sale.
What Google Ads impression share measures
Impression share is your impressions divided by the total impressions you were eligible to get, as defined in Google's page About impression share. Google estimates "eligible" from your targeting settings, approval statuses and quality.
- It is an estimate. Google works it out from the auctions across the day, including auctions where your ad was competitive enough to show. It says small movements don't necessarily need action.
- It covers Google Search only. Search partners are not included in impression share data.
- It is reported per campaign type. Google's page Get impression share data says the metrics are not added up across the account, so a Search campaign and a Performance Max campaign each have their own figure.
- It lags. Data can take 24 to 48 hours to process. A dash instead of a number can mean there isn't enough data yet, for example low traffic or new keywords.
The impression share columns, and where to find them
You add impression share in the Campaigns view: select the columns icon, open Competitive metrics, tick the columns you want and apply. Google shortens impression share to "IS" in the column names.
| Column | What it tells you | Question it answers |
|---|---|---|
| Search impr. share | Your share of the Search impressions you were eligible for | How much of the available demand did I show for? |
| Search lost IS (budget) | How often your ads didn't show because the budget ran short. Campaign level only | Is my budget the limit? |
| Search lost IS (rank) | How often your ads didn't show because of poor Ad Rank | Are my bids or ad quality the limit? |
| Search top IS | Your share of eligible impressions among the top ads | How often am I above the organic results? |
| Search abs. top IS | Your share of eligible top impressions where you were the very first ad | How often am I the first ad? |
| Search lost top IS (budget / rank) | How often you missed the top ads because of budget or Ad Rank | Why am I not higher on the page? |
| Search exact match IS | Your share on searches that matched your keywords exactly, or close variants | Am I covering the searches I chose on purpose? |
Google's page "About top and absolute top metrics" adds that the top columns describe where on the page your ad showed, not how it ranked against other ads.
Lost to budget or lost to rank: what each one means
Google gives two reasons for missed impressions on Search, each with its own column: the budget ran out, or your Ad Rank was too low. The fix for one does nothing for the other, so read both columns before you touch anything.
Lost to budget means your ads didn't show because the budget ran short. The direct fix is more budget, or moving budget here from a weaker campaign.
Lost to rank means your ad wasn't strong enough to show, or to show in that position. Google's page About Ad Rank lists six things that set it:
- Your bid.
- The quality of your ads and landing page.
- The Ad Rank thresholds, the minimum an ad needs to show at all. They differ by position on the page.
- How competitive the auction is.
- The context of the person's search.
- The expected impact of your assets and other ad formats.
Google adds that better quality can often lower your cost per click, so fix quality before you pay more per click. My guide to Google Ads Quality Score covers what feeds it.
Lost to rank is often a bidding choice
Because your bid is one of the six Ad Rank factors, anything that holds your bids down shows up as lost impression share (rank), even when your ads are fine. Two settings do this:
- A tight target CPA. If the target sits well below what leads really cost, Google's bidding has to keep bids low to stay near it, and you lose auctions you could have won. That can be the right trade if those auctions bring expensive leads.
- A low bid cap. Maximize clicks lets you cap bids with a maximum CPC, according to Google's page "About Maximize clicks bidding", and a manual CPC bid works the same way. Set it low and you stay out of pricier auctions.
So check the bid strategy before you rewrite ads. If lost IS (rank) is high and cost per lead is on target, the bidding may be skipping auctions that would cost too much. My guide to Google Ads bidding strategies covers how to set a target near your real cost per lead.
A higher percentage is not always better
Because impression share is a percentage, you can raise it by shrinking what you are eligible for. Google's page Improve impression share says narrowing your locations may raise impression share, but it also reduces the impressions available to you. The figure looks better while the campaign reaches fewer people.
It does not always move the way you expect, either. In the clinic account in the box below, excluding cities made impression share go down, not up.
What I learned from a clinic account: in a Dubai aesthetic clinic's Google Search campaign, I excluded a handful of underperforming cities so spend would go to the cheaper ones. Impression share fell, lost impression share to both rank and budget climbed, and ROAS dropped from 3.11x in June to 1.64x in August. After I removed the exclusions it was back to 2.59x in September. The full story is in my location targeting write-up. The lesson I took: read impression share next to cost per lead and revenue, never on its own.
When target impression share bidding makes sense
Target impression share is a bid strategy that aims for a share of impressions in a position you choose, described in Google's page About Target impression share bidding. You pick one of three placements: Top, Absolute top or Anywhere on the results page, then set the percentage.
- Where it fits: your own brand terms. Google's example is a brand campaign set to 100%, to show in as many brand searches as possible.
- Set a max CPC bid limit, but not too low. Google warns that a low limit can stop the strategy from reaching your target.
- Where it doesn't fit: service keywords that must bring leads at a set cost. Google's page is about showing your ad, not about conversions, so use a conversion-based strategy there.
See who you are losing to with auction insights
The auction insights report shows how you compare with other advertisers in the same auctions, according to Google's page About auction insights. For Search campaigns it shows six figures: impression share, overlap rate, position above rate, top of page rate, absolute top of page rate and outranking share.
To open it, tick a campaign, ad group or keyword and select Auction insights. Two limits: the report doesn't show insights when your impression share is below 10%, and items need a minimum amount of activity first. I find it most useful on brand campaigns, where it shows which other advertisers turn up in the auctions for your name.
Which to fix first: a rule for lead-gen accounts
Lost impressions only matter if winning them would bring leads you can afford. Work through these in order, one campaign at a time:
- Check what counts as a conversion. If the account counts button clicks or page views, your cost per lead is wrong and every decision below will be too.
- Brand campaign missing impressions: fix it next. Brand searches are people already looking for you.
- Lost to budget, cost per lead on target: this is where more budget is most likely to pay. Add budget in steps, or move it from a campaign that misses its target, and watch cost per lead week by week. Don't assume the extra leads will cost the same as your average.
- Lost to budget, cost per lead over target: don't add money. Tighten keywords, search terms and locations first, so the budget you have goes further.
- Lost to rank, with a target CPA or max CPC cap: compare the setting with what leads really cost. If it is far below, raise it a little and see what happens to volume and cost.
- Lost to rank, bids already sensible: work on ad relevance and the landing page before you raise bids.
An illustrative example (the figures are made up to show the arithmetic): a Search campaign spends AED 9,000 a month at AED 150 per qualified lead, against a target of AED 200, and loses 30% of impressions to budget. That is the case for adding budget, in steps. If the same campaign ran at AED 260 per lead, the 30% would be the wrong thing to chase.
What to do this week
- Add the columns Search impr. share, Search lost IS (budget) and Search lost IS (rank) to your Campaigns view.
- Set the date range to the last 30 days so short swings and the 24 to 48 hour lag don't mislead you.
- Put cost per qualified lead next to them for each campaign.
- Sort campaigns into the rule above and change one thing per campaign.
- Check auction insights on your brand campaign.
If you would rather have this done for you, it is part of my Google Ads management work.
Frequently asked questions
What is a good impression share in Google Ads?+
Why does my impression share column show a dash?+
Why can't I see lost impression share (budget) for my ad groups?+
Related
Losing impressions and not sure why?
Message me on WhatsApp or request a free campaign audit. I'll read your impression share columns next to your cost per lead, check what your account counts as a conversion, and tell you whether budget, bids or ads are the real limit.